Sharper Image 204050 Instruction Manual Download Page 2

IMPORTANT SAFETY INSTRUCTIONS 

 

1.  Read these instructions. 
 
2.  Keep these instructions. 

 

3.  Heed all warnings. 
 
4.  Follow all instructions. 
 
5.  Do not use this apparatus near water. 
 
6.  Clean only with dry cloth. 
 
7.  Do no

 

instructions. 

 
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that produce heat. 

 
9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized 

plug has two blades with one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the third prong are provided for 
your safety. If the provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet. 

 

10.  Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs, 

convenience receptacles, and the point where they exit from the apparatus. 

 
11.  Only use attachments/accessories specified by the manufacturer. 

 

12.  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, 

or  sold  with  the  apparatus.  When  a  cart  is  used,  use  caution  when  moving  the 
cart/apparatus combination to avoid injury from tip-over. 

 

 

- 3 - 

- 2 - 

13.  Unplug this apparatus during lightning storms or when unused for long periods of 

time. 

 
14.  Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has 
been dropped. 

 

FCC NOTICE 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures: 

 Reorient or relocate the receiving antenna. 
 Increase the separation between the equipment and receiver. 
 Connect the equipment into an outlet on a circuit different from that to which the receiver 

is needed. 

 Consult the dealer or an experienced radio/TV technician for help. 

 
WARNING: 

Changes or modifications to this unit not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment. 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 204050

Page 1: ...ng intended use In order to disconnect the apparatus from the mains completely The mains plug should be disconnected form the mains socket outlet completely La prise du secteur ne doit pas être obstru e ou doit être facilement accessible pendant son utilization Pour être completement d connect de l alimentation d la prise doit être d branch e du secteur Battery shall not be exposed to excessive he...

Page 2: ...ersonnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device pursuan...

Page 3: ...LED Display Display Information e g time radio frequency nature sound 10 ALARM1 BUZZER Indicator This indicator shows that the unit is set in ALARM 1 buzzer mode 11 ALARM1 RADIO Indicator This indicator shows that the unit is set in ALARM1 radio mode 12 ALARM2 BUZZER Indicator This indicator shows that the unit is set in ALARM2 buzzer mode 13 ALARM2 RADIO Indicator This indicator shows that the un...

Page 4: ...different Nature Sounds For example means the first Nature Sound means the twentieth Sound and means all the nature sound 6 LISTENING TO THE AM FM RADIO 1 Press the ALM OFF SOURCE button to select the FM or AM mode 2 Press the button or button step by step to tune to the desired radio stations 3 Press and hold the button or buttons for approx 1 second it will start to search the next radio station...

Reviews: