Li-ion
battery:
3.7V/100mA
Charging time:
2 hours
Stand-by time:
Approx. 60 hours
Continuous working time:
Approx. 3.5 hours
Bluetooth name:
“Magic Hat”
OPERATION
Charging
Plug the Micro USB cable into the headphones. Then,
connect the other end to the USB port of a computer.
While the device is charging, the LED will turn red. When
the LED turns off, the device is fully charged, and you
can disconnect the cable. NOTE: It should take about 2
hours to fully charge a completely drained battery.
Turning the device ON
Press and hold the button for 3 seconds, The blue
LED will begin to flash slowly.
Turning the device OFF
Press and hold the button for 3 seconds again. The
device is off when the LED turns off.
Bluetooth pairing
When the device is off, press and hold the button for
5 seconds. The LED will flash alternately red and blue.
Turn on the Bluetooth function on your device. Select
“Magic Hat” on your device to pair it via Bluetooth.
NOTE: Some devices ask for a password when pairing
with speakers for the first time. If your device asks for a
password, enter “0000.”
To 5-pin micro
USB port in hat
To computer USB
port or other power
source
