1.
Press the Power On / Off / Record / Save button (1) until the red light turns on.
The red light will turn off after three seconds, and a blue light will stay illuminated,
indicating the HD Camcorder Watch is entering standby mode.
2.
Press the Power On / Off / Record / Save button (1) once more. The blue light
flashes 3 times then turns off, indicating that the HD Camcorder Watch has
started recording. (Please note: The Camera Lens (4) is concealed in the 6:00
position of the watch face and is intentionally mounted upside down. When you
record, rotate your wrist so that the 12:00 position is closest to the floor. This will
produce an image that is right-side-up.)
3.
To stop recording, press the Power On / Off / Record / Save button (1) once. The
blue light will turn on, showing the video is saved, and the HD Camcorder Watch
is back to the standby mode.
4.
During recording, the system will automatically save the file every 20 minutes. In
order to save power, the Indicator Light will stay off as it saves the file.
NOTE: For maximum secrecy, the Indicator Light is very small and sometimes difficult to see in
bright light. You may need to cover it with your hand or go to a dark area to see if it is illuminated.
CHARGING THE HD CAMCORDER WATCH
In the Power Off mode, connect the HD Camcorder Watch to a computer with the
included USB cable. (To expose the hidden USB Port, unscrew the decoy knob/cap,
located at the 9:00 position on the dial.) When the HD Camcorder Watch is
connected to a USB power source, both the blue light and the red light will illuminate
during charging. When the HD Camcorder Watch is fully charged, both lights will turn
off. NOTE: Charging time is approximately 3-4 hours.
