ZQ-590 Battery Replacement
– 2 –
Battery used
■
■
■
■
Precautions
Since improper use of the battery may cause leakage or explosion,
strictly observe the following precautions:
• If fluid from a leaking battery accidentally gets into your eyes, it may
result in serious injury. Should this occur, flush your eyes with clean
water and consult a physician immediately.
• Should fluid from a leaking battery come into contact with your skin or
clothes, immediately wash with clean water.
• If the Organizer will not be used for an extended period of time, to
avoid damaging the Organizer remove the battery and store in a safe
place.
• Do not leave an exhausted battery inside the Organizer.
• Do not use different types of battery or partially used battery.
• Insert the battery with its positive side (+) correctly oriented.
• Never throw batteries into a fire because they might explode.
• Keep batteries out of reach of children.
• When the battery is near exhaustion, remove it from the Organizer
immediately to avoid battery leakage and corrosion inside the Orga-
nizer.
■
■
■
■
Battery Replacement
Battery replacement time
When “
” is displayed, immediately replace the battery with a new
one.
If the battery level is low, the alarm may not sound, or similarly the
Backlight may not function or remain on for less than the set interval.
Continued use of the Organizer with low battery can alter or clear the
memory contents. Memory contents may be lost if the battery is improp-
erly replaced or if the following instructions are disregarded.
Caution:
• Communication with PC may not be available when the battery level
is low.
• Under the low battery condition, new data entry and editing of existing
data may not be performed in some modes. Also, password setting
may not be made.
Replacing the battery
1. Turn off the Organizer.
2. On the back of the Organizer, slide the Battery Replacement switch
to the "REPLACE BATTERY" position, then slide out to remove the
battery compartment cover.
3. Remove the old battery.
4. Insert the new battery, making sure to correctly orient the plus (+)
and minus (-) terminals, as illustrated.
5. Slide the battery compartment cover closed until it snaps into place,
then slide the Battery Replacement switch back to the "NORMAL
OPERATION" position, then press the RESET switch.
6. A dialog "System Reset Clear All Data? Yes No" will be displayed.
Tap "No".
7. Check that the clock is set to the correct time.
Caution:
• Clock settings, entries, and/or other settings may be lost when the
battery is removed for a long time. Replace the battery promptly.
• Make sure to confirm all settings after replacing the battery.
1. Battery Replacement
Type
Size/Model
Qty.
Alkaline battery
"AAA"/LR03
1
• Be sure to write down any important information stored in the
memory before replacing the battery.
BATT
• Make sure the power is turned off before replacing the battery.
• Do not press [ON] until the battery replacement procedure is com-
plete.
NORMAL
OPERATIO
N
REPLACE B
ATTERY
REPLACE BATTERY
NORMAL OPERATION
REPLA
CE
B
ATT
ER
Y
NO
RM
AL
O
PERA
TION
RE
SE
T
