Sharp XV-Z1A, Service Manual

Page: 28 / 65

XV-Z1E/A
28
Step
Adjustment Position
Adjustment Conditions Adjustment Method
29 Vertical position
(PAL) 1. Receive the monoscope
signal of PAL.
2. Push S2001 and set the fol-
low DAC mode.
Group : TEST
Subject : V-POS
»
Using the Operation key switch ' " , adjust the 21
points of V-POS.
31 Sensor of
thermostat 1. Push S2001 and set the fol-
low DAC mode.
Group : TEST
Subject : HL
»
Using the Operation key switch ' " , adjust the 3
points of SH-POS.
27 Sign display
position
(L2003) 1. Receive the monoscope
signal of NTSC or PAL.
2. Push the volume key ' "
»
Adjust L2003 so the volume sign on screen display is
symmetrical to the right and left side.
30 Samplehold 1. Receive the colour bar sig-
nal of NTSC.
2. Push S2001 and set the fol-
low DAC mode.
Group : TEST
Subject : SH-POS
»
Using the Operation key switch ' " , adjust the 8
points of SH-POS.
28 Vertical position
(NTSC) 1. Receive the monoscope
signal of NTSC.
2. Push S2001 and set the fol-
low DAC mode.
Group : TEST
Subject : V-POS
»
Using the Operation key switch ' " , display is sym-
metrical to the upper and lower side.
Overscan : 93~95%