manualshive.com logo in svg

Sharp XV-Z15000 - DLP Projector - HD 1080p, Operation Manual

Share
Download
Sharp XV-Z15000 - DLP Projector - HD 1080p Operation Manual Download Page 33

-30

About Copyrights

When using the RESIZE function to select an image size with a different aspect ratio to a TV program or 
video image, the image will look different from its original appearance. Keep this in mind while choosing an 
image size.
The use of the RESIZE or Overscan function to compress or stretch the image for commercial purposes/public 
displays in a café, hotel, etc. may be an infringement of copyright protected by law for copyright holders. 
Please use caution.

•

•

RESIZE

Output screen image

ZOOM 14:9

An image with a 14:9 aspect ratio and letterboxing is enlarged while 
maintaining the original aspect ratio.

SMART ZOOM

An image with a 4:3 aspect ratio is slightly enlarged.

DOT BY DOT

The image is displayed according to the original input signal.

Image Projection 

(Continued)

XV-Z15000̲E̲US.indb   30

XV-Z15000̲E̲US.indb   30

2008/12/25   14:25:33

2008/12/25   14:25:33

Summary of Contents for XV-Z15000 - DLP Projector - HD 1080p




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands