Component cable
(commercially available)
DVD player or
DTV* decoder
Connecting to
Component Video Equipment
Using a Component Cable
(INPUT 1 or 2)
Use a component cable when connecting the
component video equipment such as DVD play-
ers and DTV* decoders to INPUT 1 or 2 termi-
nal.
* DTV is the umbrella term used to describe the
new digital television system in the United States.
Connect the projector to the com-
ponent video equipment using the
component cable.
Note
•
When connecting the projector to the
video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Options”
menu, or select the Component mode by
pressing
on the remote control. See
page
65
.
•
Set the “Resolution” of “Special Modes”
to “480P” during input of a 480P signal.
See page
54
.
Connecting to RGB Video
Equipment Using a 5 RCA
RGB Cable (INPUT 1 or 2)
Use a 5 RCA RGB cable when connecting the
RGB video equipment such as DVD players and
DTV* decoders to INPUT 1 or 2 terminal.
Connect the projector to the RGB
video equipment using the 5RCA
RGB cable.
Note
•
When connecting the projector to the
video equipment in this way, select “RGB”
for “Signal Type” in the “Options” menu,
or select the RGB mode by pressing
on the remote control. See page
65
.
•
The (HD/C sync) and (VD) terminals may
be used depending on the specifications
of the DTV decoder connected to this pro-
jector. Please refer to the operation
manual of the DTV decoder for details.
To analog RGB
output terminal
5 RCA RGB cable
(Commercially available)
DVD player or
DTV* decoder
To analog component
output terminal
Connecting the Projector to Other Devices
-18
