02/8/6
XL-HP700W(A)3.fm
E-31
ENGLISH
XL-HP700W
Refe
rences
Maintenance
!
Cleaning the tape-handling parts
"
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
"
When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
"
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
!
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
"
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
"
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
!
General
!
Amplifier
Pinch roller
Erase head
Capstan
Recording/Playback head
A
A
C
D
B
B
Power source
AC 110/127/220/230 - 240 V, 50/60 Hz
Power
consumption
165 W
Dimensions
Width: 205 mm (8-1/8")
Height: 260 mm (10-1/4")
Depth: 366 mm (14-7/16")
Weight
7.9 kg (17.4 lbs.)
Output power
MPO: 342 W (171 W + 171 W) (10 % T.H.D.)
RMS: 200 W (100 W + 100 W) (10 % T.H.D.)
RMS: 184 W (92 W + 92 W) (0.9 % T.H.D.)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Subwoofer (Audio signal): 200 mV/10 ko-
hms at 70 Hz
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
Microphone: 1 mV/600 ohms
