Sharp XL-DV60H Operation Manual Download Page 58

Page: 58 / 64

05/5/10

XL-DV60H(A).fm

TINSEA055SJZZ

XL-DV60H

Ref

renc

Troubleshooting chart

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

General

Remote control

DVD player

Symptom

Possible cause

The clock is not set
to the correct time.

Did a power failure occur? Reset the clock. (Re-
fer to page 21.)

When a button is
pressed, the unit
does not respond.

Set the unit to the power stand-by mode and
then turn it back on.

If the unit still malfunctions, reset it. (Refer to
page 59.)

No sound is heard.

Is the volume level set to "0"?

Are the headphones connected?

Are the speaker wires disconnected?

Is the TV or amplifier volume level set to "0"?

Noise is heard dur-
ing playback.

Move the unit away from any computers or mo-
bile phones.

The power is not
turned on.

Is the unit unplugged?

Symptom

Possible cause

The remote control
does not operate.

Is the AC power lead of the unit plugged in?

Is the battery polarity correct?

Are the batteries dead?

Is the distance or angle incorrect?

Does the remote control sensor receive strong
light?

Symptom

Possible cause

No images are dis-
played.

Is TV turned on?

Is the input of TV switched?

Even though a disc
is loaded, "No
Disc" is displayed.

Is the disc loaded upside down?

Is the disc very dirty?

Does the disc satisfy the standards?

Is the unit located near excessive vibrations?

Playback sounds
are skipped.

Is condensation formed inside the unit?

The control but-
tons do not func-
tion. Music or
video playback is
interrupted.

Is the disc very dirty?

Does the disc satisfy the standards?

Is the unit located near excessive vibrations?

Is condensation formed inside the unit?

Pictures and
sound are
skipped.

Is the disc very dirty?

Is the unit located near excessive vibrations?

Is condensation formed inside the unit?

The unit does not
operate even if the
power is on.

Is a disc other than a DVD (region number 4 or
ALL), video CD, audio CD, CD-R or CD-RW
loaded?

Images cannot be
played back.
(Sound is not
heard.)

Is a disc other than a DVD (region number 4 or
ALL), video CD, audio CD, CD-R or CD-RW
loaded?

Is the disc very dirty?

Is the disc loaded upside down?

Is the optical pickup dirty?

Is the TV input set to video (VIDEO1, VIDEO2,
etc.)?

Is the unit turned on?

Summary of Contents for XL-DV60H

































































Search results

Summary of Contents for XL-DV60H

Reviews:

Brands by name

Popular brands

Sharp XL-DV60H, Operation Manual

Search results

Summary of Contents for XL-DV60H

Reviews:

Brands by name

Popular brands