2
Listening to the iPod
Notes:
The unit is installed with the iPod adaptor No. A.
Remove and insert the recommended iPod adaptor if
required (refer table on page 8 in the operation manual).
To insert iPod adaptor
1
Open the iPod cover by pulling up the tip.
2
Insert the iPod adaptor into the iPod dock and connect
your iPod.
To remove iPod adaptor
Insert the tip of a screwdriver (“–” type, small) into the iPod adaptor hole as shown and lift
upward to remove.
pull up
iPod
Dock connector
iPod (bottom)
iPod dock
iPod
connector
iPod adaptor
Simply remove the iPod from the iPod dock. It is safe to do so even during playback.
iPod playback
1
Press the iPod button on the remote control or FUNCTION button on the ma
in unit
repeatedly to
select iPod function.
2
Insert iPod unit in iPod dock of main unit.
3
Press the button to start playback.
To disconnect iPod
XL-DAB10
Listening to a CD or MP3/WMA disc
Listening to USB mass storage
device / MP3 player
Disc playback
To play back USB/MP3 player with folder mode off
To remove USB memory device
1
Press the CD button on the remote control or FUNCTION button on the main unit
repeatedly to select CD function.
2
Press the OPEN/CLOSE button to open the disc tray.
3
Place the disc on the disc tray, label side up.
4
Press the OPEN/CLOSE button to close the
disc tray.
5
Press the button to start playback.
After the last track is played, the unit will
stop automatically.
XL-DAB10
XL-DAB10
Note:
This USB mass storage device
or MP3 player is not compatible
with MTP and AAC file systems.
1
Press the USB button on the remote control or FUNCTION button on main unit
repeatedly to select USB function. Connect the USB memory device that has
MP3/WMA format files on the unit.
2
Select desired file to be played back by pressing the or button.
3
Press the (USB ) button. Playback will start.
XL-DAB10
1
Press the (USB ) button to stop playback.
2
Disconnect USB memory device from the USB terminal.
3
Close the terminal door.
