E-6
EN
Setting the clock (Remote control only)
In this example, the clock is set for the 24-hour (0:00 - 23:59)
display.
1
Press the ON/STANDBY button to turn the power on.
2
Press the CLOCK button.
3
Within 10 seconds, press the ENTER button. To adjust
the day, press the or button and then press the
ENTER button.
4
Press the or button to select 24-hour or 12-hour
display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
5
To adjust the hour, press the or button and then
press the ENTER button. Press the or button
once to advance the time by 1 hour. Hold it down to ad-
vance continuously.
6
To adjust the minutes, press the or button and
then press the ENTER button. Press the or button
once to advance the time by 1 minute. Hold it down to
advance the time by 5 minutes interval.
To confirm the time display:
Press the CLOCK button. The time display will appear for
about 5 seconds.
Note:
When power supply is restored after unit is plugged in again
or after a power failure, reset the clock.
To readjust the clock:
Perform “Setting the clock” from step 1.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 19 for details.]
2
Perform “Setting the clock” from step 1 onward.
Listening to
Bluetooth
enabled devices
■
Bluetooth
Bluetooth
wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 10 meters (30
feet) without the hassle of having to use cables to connect
these devices.
This unit supports the following:
Communication System:
Bluetooth
Specification version
2.1
Bluetooth
+ Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
●
This unit cannot be used to talk over the telephone even
when there is a
Bluetooth
connection made to a mobile
phone.
●
Please refer to the operating manual supplied with the
mobile phone for details on operation of your mobile
phone while transmitting the sound using a
Bluetooth
connection.
■
Pairing
Bluetooth
devices
Bluetooth
devices need to be initially paired first before
they can exchange data. This unit can memorize up to a
maximum of 99 devices. Once paired, it is not necessary to
pair them again unless:
●
pairing is made with more than 99 devices. Pairing can
only be made one device at a time. If subsequent de-
vice is paired, the oldest device paired will be deleted
and replaced with the new one.
●
this unit is reset. All pairing information is deleted when
unit is reset.
●
pairing information is deleted while re-pairing, etc.
Indicators:
Indicator
Condition
Bluetooth
status
Blinks
In waiting or pairing mode
Lights up
Connected
No indication
Unconnected
However, the indication status is not displayed during
Bluetooth
standby mode.
