Sharp XG-V10XU - Conference Series XGA LCD Projector, Service Manual

Page: 13 / 182

13
XG-V10XU
Use as a Laser Pointer
Slide the MOUSE/ADJUSTMENT switch to MOUSE, and press LASER POINTER ( ) to activate
the laser pointer.
1.2.3 4.5.6
Conference Series
LASER
POINTER
MOUSE ADJ.
MOUSE/ADJUSTMENT
switch
• When the button is released, the light automatically goes off.
• For safety reasons, the laser pointer automatically goes off after 1 minute of continuous use. To turn it on, release LASER
POINTER ( ) and press again.
Wired Remote Control
When the remote control cannot be used due to the range
or positioning of the projector (rear projection, etc.), connect
a 3.5 mm stereo minijack cable (sold separately) from the
wired remote control input on the bottom of the remote
control to the WIRED REMOTE control input terminal on the
side of the projector.
• The laser pointer and wireless mouse functions can still be
operated wthe wired remote control.
3.5 mm stereo minijack cable
(sold separately)