Sharp XE-A507 Instruction Manual Download

Page: 59 / 112

■

You can program an upper limit amount and description for received-on-account key.

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99

• TEXT (Use the character entry)

Description for the received-on-account key. Up to 12
characters can be entered.

■

You can program an upper limit amount and description for paid-out key.

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99

• TEXT (Use the character entry)

Description for the paid-out key. Up to 12 characters can be
entered.

■

Cash in drawer

You can program the description and the upper limit amounts for cash in drawer (sentinel).

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 99999999.99

NOTE

When the cash in drawer amounts exceeds a limit
amount, the sentinel mark (X) will be displayed.

• TEXT (Use the character entry)

Description for the cash in drawer. Up to 12 characters can be
entered.

■

Commission rate (Commission 1, Commission 2)

Procedure

Program each item as follows:

• RATE (Use the numeric entry)

Commission rate (0.00 to 999.99)

• TEXT (Use the character entry)

Description for the commission rate.
Up to 12 characters can be entered.

Summary of Contents for XE-A507

















































































































Search results

Summary of Contents for XE-A507

Reviews:

Related manuals for XE-A507

Brands by name

Popular brands

Sharp XE-A507, Instruction Manual

Search results

Summary of Contents for XE-A507

Reviews:

Related manuals for XE-A507

Brands by name

Popular brands