Sharp XE-A177 Full Detailed Instruction Manual Download Page 45

Page: 45 / 134

Correction of the Next-to-Last or Earlier Entries (Indirect Void)

If you find an incorrect entry before finalizing the transaction (e.g. before pressing the

key), you can void

the entry by the cursor operation or the key sequence operation.

Indirect void by cursor operation

You can void department, PLU/subdepartment, item refund, amount discount/premium and percent entries.
Move the cursor to the item to be voided, and press the

key.

Indirect void by key sequence operation

You can void department, PLU/subdepartment and item refund.
Press the

key just before you press a department key,

key, direct PLU key or

key. For the

refund indirect void, press the

key after you press the

key.

Example

(Indirect void by cursor operation)

Key operation

Display

1310

Move the cursor to the
item to be voided.

Summary of Contents for XE-A177







































































































































Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands

Sharp XE-A177, Full Detailed Instruction Manual

Search results

Summary of Contents for XE-A177

Reviews:

Related manuals for XE-A177

Brands by name

Popular brands