Sharp WH-T36E, Service Manual

Page: 8 / 24

8
3. WATER PIPE
1. Turn the joints between body unit, the WATER VOLUME KNOB and SHOWER HOSE manually.
Never use other tools to avoid breaking plastic parts.
2. When driving screws, use power less than 40 kgf.cm.
3. Piping installation (as illustration).
Fig. 14
Main breaker
Bathroom
Fig. 15
POWER SUPPLY INSTALLATION
1. Be sure to cut off the main power supply switch every time before starting any electrical work.
Use insulated double wire gage size at least 4 square millimeters. (Model WH-T36E, WH-T39EP)
and size 6 square millimeters (Model WH-T46E) for power supply line.
Connecting supply line from the main distribution control unit to the cut off breaker.
(This breaker should be installed outside the bathroom and connected permanently).
Water inlet
Filter
O-ring
Valve
Length of water inlet hose at least 15 cm.
Filter
Shower hose
Water volume
Shower