Sharp ViewcamZ VL-Z7S Operation Manual Download

Page: 30 / 122

Preparation

Tips on Recording
Positions

Turn the LCD
monitor so that the
screen faces
upward.

Balance your

weight on both

legs.

Turn the LCD

monitor so that the

screen faces

downward.

Place your elbows

against your sides.

To create images that are easy to watch during playback, try to record with an upright
posture and steady hands to prevent a shaky image.

Holding the camcorder

Put your right hand through the hand strap, and place your left hand under the camcorder
for support.

Basic posture

Place the viewfinder

eyecup firmly against

your eye.

Shooting from a low angle

Shooting from a high angle

Note:

• Take care not to touch the microphone with your fingers during recording. It will cause noise on

the audio track. Also, take care not to touch the flash or flash sensor with your fingers during
Card Recording.

Summary of Contents for ViewcamZ VL-Z7S



























































































































Search results

Summary of Contents for ViewcamZ VL-Z7S

Reviews:

Related manuals for ViewcamZ VL-Z7S

Brands by name

Popular brands

Sharp ViewcamZ VL-Z7S, Operation Manual

Search results

Summary of Contents for ViewcamZ VL-Z7S

Reviews:

Related manuals for ViewcamZ VL-Z7S

Brands by name

Popular brands