Sharp ViewCam-Slim VL-ME10E Page 32 Operation Manual Download

Page: 32 / 122

Preparation

Inserting and Removing a
Card

This camcorder accepts an SD Memory Card
(commercially available) or a MultiMediaCard
(supplied) for storage of still images.

Inserting a Card

Make sure that the POWER switch is set
to OFF.

Hold the camcorder as shown in the
figure, and slide the card slot cover
release in the direction of the arrow.

• The card slot cover is opened.

Insert a card into the slot with the label
facing upwards and the chipped corner
facing the lens, and then push it in as far
as it will go.

Close the card slot cover.

Card slot cover
release

Removing a Card

Perform steps 1 and 2 of “Inserting a
Card”.

Push the centre of the card edge in to
release the card.

Pull the card straight out.

Notes:

• The supplied MultiMediaCard is preformatted for

immediate use.

• See pages 97 and 98 for detailed information on

the use of MultiMediaCards and SD Memory
Cards.

Caution:

• Do not remove the card from the camcorder

while data is being recorded on the card (the

indicator flashes on the screen), as this may
result in deletion of images on the card or
damage to the card itself.

Label

Chipped
corner

Summary of Contents for ViewCam-Slim VL-ME10E



























































































































Search results

Summary of Contents for ViewCam-Slim VL-ME10E

Reviews:

Related manuals for ViewCam-Slim VL-ME10E

Brands by name

Popular brands

Sharp ViewCam-Slim VL-ME10E, Operation Manual

Search results

Summary of Contents for ViewCam-Slim VL-ME10E

Reviews:

Related manuals for ViewCam-Slim VL-ME10E

Brands by name

Popular brands