Sharp VC-MH711GM Operation Manual Download

Page: 37 / 39

MORE INFORMATION ABOUT YOUR VCR

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE/CURE

Display is not working.

• Make sure the VCR is not in LOW POWER mode.
• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug another

appliance in).

VCR will not operate -

appears in VCR display.

• Press the

TIMER ON/OFF

button to disengage timer.

VCR will not respond to any
commands.

• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2 hours.

Tape cannot be loaded.

• Make sure there is no other tape in the VCR.
• Make sure you are loading the tape correctly.

VCR cannot be operated
by remote control.

• Remote control is too far away from the main unit.
• Point the remote control at the VCR.
• Batteries are flat - replace both.
• Batteries have not been inserted correctly.
• VCR is positioned in strong light.

No picture appears.

• Make sure the TV is set to the video channel.
• Check all connecting cables.

Rewind is not possible.

• Make sure the tape is not at the start.

Picture does not change
even though

CHANNEL

buttons are pressed.

• Make sure the VCR is not in Timer or Menu mode.

Desired channel position
can not be selected.

• The channel position has been set to be skipped. Cancel

the SKIP mode for that channel.

No colour or poor TV picture
on normal viewing.

• Make sure all the cables are connected properly.
• Make sure the VCR power cord is properly plugged in.

Playback picture is snowy.

• Adjust the tracking using

CHANNEL

buttons.

• Try another tape.
• The video heads may have been contaminated - refer to a

SHARP Service Facility.

Tape is automatically
ejected when pressing

REC

(

) or

TIMER ON/

OFF

buttons.

• The record-protection tab has been removed.

Playback recording does
not playback in stereo.

• Ensure the VCR is connected to a stereo TV and SCART lead.
• Programme may not carry stereo.

The S

HOW

IEW

system does

not record desired
programme.

• Broadcast does not carry VPS/PDC signal which alters

recording time.

• Check VPS/PDC mode is switched to ON.
• Ensure date and time are correctly set on the VCR.

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for VC-MH711GM








































Search results

Summary of Contents for VC-MH711GM

Reviews:

Related manuals for VC-MH711GM

Brands by name

Popular brands

Sharp VC-MH711GM, Operation Manual

Search results

Summary of Contents for VC-MH711GM

Reviews:

Related manuals for VC-MH711GM

Brands by name

Popular brands