manualshive.com logo in svg

Sharp VC-M36GM, (German) Bedienungsanleitung, Page: 43 / 44

Share
Download
Sharp VC-M36GM (German) Bedienungsanleitung Download Page 43

GB-36

TROUBLESHOOTING

TROUBLESHOOTING

AREA

PROBLEM

POSSIBLE CAUSE/CURE

INITIAL 

INSTALLATION

When the VCR is first 
plugged in the VCR 
display appears 
blank. When the 

STANDBY

 

(

) 

button is pressed the 
display still appears 
blank.

• The Video may be in POWERSAVE mode. 

Press the 

STOP

 (

) button to switch the 

VCR on then press and hold the 

MENU

 and 

CHANNEL 

 buttons together on the 

front of the VCR for 10 seconds. 
Now continue from step 1 of TUNING THE TV 
INTO THE VCR.

INSTALLATION

TV will not tune in to 
the VCR. 

• Check all the cables are correctly 

connected.

• Check your TV manual for correct tuning of 

your TV.

Auto Installation 
screen does not 
appear when the 
VCR is switched on 
OR Auto Installation is 
not complete.

• Reset the VCR and complete AUTO 

INSTALLATION again. (Refer to VCR Reset.)

POWER

Display is not working. • Make sure the VCR is not in POWERSAVE 

mode.

• Make sure the power cord is plugged in.
• Make sure the wall socket has power (plug 

another appliance in).

VCR will not operate - 

 appears in VCR 

display.

• Press the 

TIMER ON/OFF

 button to 

disengage timer.

VCR will not respond 
to any commands.

• Check CHILD LOCK is not engaged.
• Safety device operating: unplug VCR for 2 

hours.

PLAYBACK

No picture appears.

• Make sure the TV is set to the video channel.
• Check all connecting cables.

Playback picture is 
snowy.

• Adjust the tracking using 

CHANNEL

 /

 buttons.

• Try another tape.
• The video heads may have been 

contaminated - refer to a SHARP Service 
Facility. 

Playback recording 
does not playback in 
stereo.
(

VC-MH76GM only

)

• Ensure the VCR is connected to a stereo TV 

and SCART lead.

• Programme may not carry stereo.

RECORDING

Tape is automatically 
ejected when 
pressing 

REC

 (

) or 

TIMER
ON/OFF

 buttons.

• The record-protection tab has been 

removed.

SHOWVIEW does not 
record desired 
programme.

• Broadcast does not carry VPS/PDC signal 

which alters recording time.

• Check VPS/PDC mode is switched to ON.
• Ensure date and time are correctly set on the 

VCR.

TINS-3775UMZZ ENGLISH.book  Page 36  Monday, March 13, 2000  11:31 AM

Summary of Contents for VC-M36GM













































Reviews:

No comments