Printelligence (Malaysia) Sdn. Bhd.
36
V C - H 8 1 8 U ( 3 5 - 3 9 )
Dimensions: 257
2
182 mm
Auto Zero Back
• During Auto Zero Back, if the VCR rewinds (or fast forwards) the tape all the way without finding the “0:00.00” point, it will
stop at the beginning (or end) of the tape.
• The counter start point “0:00.00” may differ slightly from the starting point on the tape.
• This function is not operable during recording, recording pause, simple recording timer or timer recording.
This function automatically forwards or rewinds the cassette to the “0:00.00” point. Use this function to return to
a recording start point.
!
Reset the counter to “0:00.00” with
CANCEL
before recording.
@
Press
REC
to start recording.
#
After recording the desired program, press
STOP
to stop recording.
$
Press
ZERO BACK
to return to the recording start point (0:00.00).
Recorded Section Auto Repeat
P L A Y
With this feature, if the recorded portion has finished and non-
recorded portion has continued for 15 seconds, the tape will
automatically stop, rewind to the beginning and repeat
playback.
!
Press
AUTO REPEAT
on the remote control. The “
” mark will appear on the screen for 3 seconds.
@
When a non-recorded portion has continued for 15 seconds after the recorded portion has finished, the
tape will stop and begin rewinding.
#
The tape will rewind to the beginning and repeat playback.
$
To turn off the Recorded Section Auto Repeat function, press
AUTO REPEAT
once more.
• You can also set the Recorded Section Auto Repeat mode by selecting “ON” on the SET UP-selection screen. (The AUTO
REPEAT mode is preset to OFF at the factory.)
• The ON/OFF status of the Recorded Section Auto Repeat can be checked when
ON SCREEN
is pressed to display OSD.
(The “
” mark lights when the Recorded Section Auto Repeat is on.)
• If the Recorded Section Auto Repeat is on and the tape is rewound to the beginning with rewind or reverse video search, the
tape will automatically start playback.
Tape Remaining
!
Insert tape.
@
Press
ON SCREEN
on the remote control until the tape is running. The tape
remaining counter will display on the TV screen after few seconds as shown on
right.
The tape remaining computation will not be performed, if no tape is inserted to the VCR.
• If a tape with erasure protection tab removed is inserted, the tape remaining will display automatically after few seconds.
• During computation,
REC
will not functioning
• During recording, if a tape is remain 5 minutes, the tape remaining will display in flashing.
• When
and
tapes are used with a cassette adapter, the indication may not be correct.
• This function may not work properly for video tapes other than T-30, T-60, T-90 and T-120 or video tapes other than standard
tapes.
• The tape remaining does not operate when
EJECT
is pressed.
• During Fast Forward (FF) or Rewind (REW), the tape remaining calculation displayed may be different.
• The indicated lenght of tape remaining is only an approximate guide.
With this feature, you can display the remaining amount of tape on the TV screen, during
Recording or Playback a tape.
0 : 6 0 . 0
R E M . 1 : 0 0
