Recording a TV Programme
Cassette Erase Protection
A
cassette has a removable tab to prevent accidental erasure of recorded
material. Removing the tab prevents recording. To record on a video cassette with the
tab removed, place adhesive tape over the tab
Recording a TV Programme
INPUT SELECT
Insert a cassette
PAUSE/STILL STOP
PAUSE/STILL
REC
EJECT
TAPE SPEED
STOP
CHANNEL
PREPARATION
*Turn on your TV and select the video channel.
PROCEDURE
Turn on the VCR. (See page 5, item 3.)
Insert the cassette, making sure the erasure protection hole is covered
Select the channel position you wish to record with CHANNEL
the
Play)
(tan&Play)
with
light up an
VCR
Play)
best
Play)
time,
Press REC. (If the erasure protection hole is uncovered, the cassette will be ejected.) To pause during
recording, press PAUSE/STILL (F. ADV). To resume recording, press PAUSE/STILL (F. ADV) again.
To stop recording, press STOP.
l
The pause mode disengages automatically after about
5 minutes, and the VCR enters stop mode.
l
To
record audio and video from an external source through the AUDIO/VIDEO terminals on the rear of the VCR, press INPUT
SELECT on the remote control or press CHANNEL
to select the AV channel position situated between the last channel
and first channel. (When the AV position is selected, “AV” is displayed where a channel
number is usually
displayed.)
l
If the TV signals are weak and the picture changes to monochrome, set the PAL mode on the MODE selection screen. (See
Colour Mode on page 18 ) Normally, the
mode should be set to “AUTO”.
To Watch Another TV Programme While Recording
After steps
to
have been completed, select the programme you wish to view using the TV tuner. At the
end of the tape, your VCR will automatically stop recording, eject the tape and turn into POWER STANDBY
mode.
2 0
