Sharp UA-PE30E, Operation Manual, Page: 12 / 88

EN-10
TROUBLESHOOTING
Before calling for service, please review the Troubleshooting list below, since the problem may not
be the product malfunction.
SYMPTOM REMEDY (not a malfunction)
Dust and smoke are not
removed.
• Clean or replace the fi lter if they appear to be heavily soiled.
(Page 6,8,9)
• Check if the plastic bag is removed from the fi lter.
(Page 6)
The discharged air has an
odour.
• Check to see if the fi lter are heavily soiled.
Replace the fi lter.
Smell from a new product
and/or fi lter.
• Immediately after removing the plastic bag, a slight odour
may occur.
This odour is not harmful for fi lter performance or human
exposure.
Model UA-PE30E
Power supply 220 - 240 V 50/60 Hz
Fan
Speed
Operation
Fan Speed Adjustment MAX MED SLEEP
Rated Power (W) 51 30 13
Fan Speed (m
3
/hour) 180 120 60
Standby Power (W) 0.7
Recommended Room Size*
1
(m
2
) ~ 21
Filter type HEPA*
2
Cord Length (m) 2.0
Dimensions (mm) 400 (W) × 182 (D) × 463 (H)
Weight (kg) 3.9
*1 • The recommended room size is appropriate for operating the product of maximum fan speed.
• The recommended room size is an area in which a given amount of dust particles can
be removed in 30 minutes (according to standards of the Japan Electrical Manufacturers’
Association (JEM1467)).
*2 • The fi lter removes more than 99.97% of particles at least 0.3-microns in size (according to
standards of the Japan Electrical Manufacturers’ Association (JEM1467)).
Standby Power
When the product’s power plug is inserted in a wall outlet it consumes standby
power in order to operate electrical circuits. To conserve energy, unplug the power
cord when the product is not in use.
SPECIFICATIONS