14
E
BEFORE FIRST USE
operation for 20 minutes without preheat and food. You may
notice some smoke and odor during this process. This is normal
and the oven does not require servicing.
PREPARATION
1
Ventilate the room.
2
Fill the reservoir with fresh cold tap water and install.
3
Install the empty drip tray.
TO CLEAN THE OVEN BEFORE USE, FOLLOW THESE
STEPS.
1
Select CLEAN from the Home Screen.
2
Select NEW OVEN CLEAN from the list provided.
3
Insert all accessories (i.e., two trays, two racks) into the oven.
4
Fill the reservoir with fresh cold water. Replace reservoir
and press START.
5
Once NEW OVEN CLEAN is complete, use caution in
opening the oven.
1
The oven door, outer cabinet and oven cavity will become hot.
2
Do not open the oven with your face close to the oven. Steam
from the oven may cause burns.
STANDBY POWER
To activate the oven, open and close door or press manual, back
or clear.
The U.S. Department of Energy has set forth standards for
standby power and energy consumption in appliances during
periods of nonuse. In order to comply with these requirements,
the display on this unit will not be visible or active in initial
use or in periods of inactivity. This unit’s display will need to
be activated by the action of opening and closing the door or
by pressing manual, back or clear. Once the action has been
performed, the display will be fully visible and operational.
CLEAR
Press the CLEAR button to:
1
Return to Home Screen.
2
Cancel a program during cooking.
BACK
Press BACK if you want to go back to the previous page during
programming before pressing START. After pressing START,
it is not possible to return to a previous page.
NEW OVEN CLEAN
The steam generator heats the water that is used for cooking. It
should be cleaned before the first use to get rid of any odor in
the oven cavity. Clean the oven with New Oven Clean in manual
