Sharp SoftBank 205SH, User Manual

Page: 10 / 132

8
USIM Card Installation
USIM Card is an IC card containing customer and
authentication information, including handset number.
SD/USIM Card Insertion/Removal Tool
There are two inscriptions (one for USIM and one for SD) on
included SD/USIM Card Insertion/Removal Tool (hereafter
"Insertion/Removal Tool"). Align the USIM side over the back
of handset.
・Always use included Insertion/Removal Tool for USIM Card
installation. Using other devices may damage handset and
USIM Card. Take care not to lose Insertion/Removal Tool.
Inserting USIM Card
Always power off beforehand.
Open Card Slot Cover
Insert USIM Card into USIM Card Slot (bottom opening)
・Check orientation of USIM Card (see the notch), then insert
it with metal contacts facing up.
Align Insertion/Removal Tool with Card Slot, with the USIM
side (USIM挿抜時：この面が背面側) facing down
・Take care not to get Card Slot Cover caught between
handset and Insertion/Removal Tool.
Gently push in Insertion/Removal Tool until it clicks
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may expose handset to liquid.