![Sharp SMD2480CS Operation Manual Download Page 17](http://html.mh-extra.com/html/sharp/smd2480cs/smd2480cs_operation-manual_368893017.webp)
17
TIMER / SETTINGS
If the electrical power supply to your Microwave Drawer
should be interrupted, the display will intermittently show
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
after the power is reinstated. If
this occurs, the SETTINGS option you input will be erased.
Simply touch STOP/CLEAR pad and reset.
TIMER
1
Touch TIMER/SETTINGS pad 3 times.
2
Enter time.
3
Touch START/+30 SEC pad.
To cancel timer, touch STOP/CLEAR.
AUDIBLE SIGNAL ELIMINATION
At the end of timed cook, beeps will sound. The audible signal
can be turned off if you prefer quiet operation.
TO TURN SOUND OFF
1
Touch TIMER/SETTINGS pad 4 times.
SOUND
OFF ?
TOUCH
START
2
Touch START/+30 SEC pad. The display shows
SOUND
OFF
TO RESTORE SOUND
1
Touch TIMER/SETTINGS pad 4 times.
SOUND
ON ?
TOUCH
START
2
Touch START/+30 SEC pad. The display shows
SOUND
ON
END OF COOKING REMINDER
At end of timed cooking, the microwave will signal every
10 seconds for the first minute; then every 3 minutes until
STOP/CLEAR pad is touched, up to one hour.
TO TURN REMINDER OFF
1
Touch TIMER/SETTINGS pad 5 times. The display
shows
REMIND
SIGNAL
OFF ?
TOUCH
START
.
2
Touch START/+30 SEC pad. The display shows
REMIND
SIGNAL
OFF
.
TO TURN REMINDER SIGNAL BACK ON
1
Touch TIMER/SETTINGS pad 5 times. The display
shows
REMIND
SIGNAL
ON ?
TOUCH
START
.
2
Touch START/+30 SEC pad. The display shows
REMIND
SIGNAL
ON
.
AUTO START
If you wish to program the Microwave Drawer to begin
cooking automatically at a designated time of day, follow
this procedure.
1
Touch TIMER/SETTINGS pad 6 times. The display
shows
AUTO
START
TOUCH
START
.
2
Touch START/+30 SEC pad.
ENTER
START
TIME
3
Enter start time.
4:30
TOUCH
SETTINGS
4
Touch TIMER/SETTINGS pad.
ENTER
COOKING
TIME
5
Touch the number pads to enter cooking time.
20.00
TOUCH
START
OR
TOUCH
POWER
LEVEL
Touch
POWER LEVEL pad repeatedly until the desired power
level is reached.
TOUCH
START
6
Touch START/+30 SEC pad.
DEMONSTRATION MODE
TO SELECT DEMO MODE
1
Touch TIMER/SETTINGS pad 7 times. The display
shows
DEMO ON?
HOLD
START
3 SEC
.
2
Hold START/+30 SEC pad for 3 seconds. The display
shows
DEMO ON
.
TO CANCEL DEMO MODE
1
Touch TIMER/SETTINGS pad 7 times. The display
shows
DEMO
OFF ?
TOUCH
START
.
2
Touch START/+30 SEC pad. The display shows
DEMO
OFF
Note:
•
Microwave Drawer doesn’t heat in Demo Mode.
•
Display counts down quickly.
STANDBY MODE
This microwave will go into standby mode after a period of
inactivity. The backlight of the display will automatically dim
after 3 minutes if the unit has not been in operation. If the
display is in standby mode, simply touch the control panel
or open/close the door to return the backlight to maximum
brightness.
OTHER FEATURES
Summary of Contents for SMD2480CS
Page 21: ...NOTES 21 21 ...
Page 22: ...22 NOTES 22 ...