12
O P E R A T I O N P R O C E D U R E
SETTING UP ALEXA ON YOUR MICROWAVE OVEN
Your microwave oven can be controlled with Alexa using any Alexa-enabled device such as Echo or Echo Dot. To
control your microwave oven using Alexa, you’ll need to set up your microwave and connect to Alexa using one of
the below pairing methods.
Pairing Method 1: Zero-Touch Setup (ZTS)
In order to pair using this method,
all
pre-requisites listed below must be met. If not, go to pairing method #2 or #3.
You opted-in to store your Wi-Fi credentials to your Amazon account in the past. This occurs when you
previously set up another Echo family device or a Works with Alexa device.
The microwave must have been ordered from the same Amazon account and while ordering you must have
opted to link the device upon purchase. If microwave was purchased/received as a gift, or user de-selected this
option upon purchase, the microwave will not be linked to end user's Amazon/Alexa account and ZTS will not
be enabled. Please go to pairing method #2 or #3.
The microwave would need to be within the Wi-Fi range of the user’s Wi-Fi network.
The microwave should be within the wireless range of an Echo family device, which was signed into using the
same Amazon account.
If above conditions are met:
1. Plug the microwave oven into a power outlet that is grounded.
2. Ensure that home Wi-Fi is on and the device is in setup mode.
3. If the Wi-Fi icon stops blinking and stays on steadily, the device is ready to be controlled by using Alexa. (If the
Wi-Fi icon is off, press the Wi-Fi button once to turn the Wi-Fi on.)
4. Open Alexa app on your phone and sign into the same Amazon account as the one above. The Microwave
should appear in the list of devices.
• Setup mode :
While the device is in setup mode, the Wi-Fi icon is flashing until successfully paired. Setup
mode is activated for 5 minutes. After 5 minutes, setup mode will time out.
• Turning off the Wi-Fi on the device :
Used to turn on or off your device’s Wi-Fi connection. If you turn the
Wi-Fi off on the device by pressing the Wi-Fi button, the Wi-Fi icon is off on the microwave LED display and
Alexa will no longer be able to send commands to your oven. But you can still cook using the oven’s
keypad.
Pairing Method 2: Barcode Setup (BCS)
If Zero-Touch Setup (ZTS) is not possible, you can set up your microwave and connect to Alexa using Barcode Setup
(BCS).
1. Install the latest version of Alexa app on your smart device and login with your Amazon account.
2. Plug the microwave oven into a power outlet that is grounded.
3. Ensure that home Wi-Fi is on.
4. When the microwave LED display shows “Pair”
and the Wi-Fi icon starts flashing, the microwave oven is
ready for setup. (If the Wi-Fi icon is off, reset the microwave oven by pressing and holding the STOP/CLEAR
and number 1 pads simultaneously for 5 seconds.)
5. Open the Alexa App, tap the Devices icon in the lower right, and tap the “+” icon in the top right. Select “Add
Device” and “Microwave” to begin set up for your microwave oven. Follow on-screen instructions.
