4
E
INSTALLATION INSTRUCTIONS
3. Align the front face of the oven with the front face of the
pedestal drawers. Once positioned, fasten the oven to the
pedestal.
Convection Microwave Drawer
- Use the same 4
removed screws from Step 2. See Figure 3A.
*
Refer to oven installation instructions for the models'
specific below-the-counter clearance guidelines.
For Convection Microwave Drawer
*
FIGURE 3A
Sup Oven
- Use the 2 removed screws from
Step 2. See Figure 3B.
*
Refer to oven installation instructions for the models'
specific below-the-counter clearance guidelines.
For Sup Oven
*
FIGURE 3B
4. Adjust the height of the overall unit to fit your specific
opening. The pedestal contains 4 adjustable feet. To
adjust, have one person tilt the unit to one side while the
other person adjusts the 2 feet on the raised side to the
desired height. Repeat this step by tilting the unit to the
other side and adjusting the other 2 feet. Ensure that all
feet are adjusted equally to balance the unit. See Figure 4.
CAUTION: Do not tilt forward. The pedestal drawers will
extend out.
USE CHANNEL LOCK OR
SLIP-JOINT PLIERS TO
LOOSEN THE FEET
PRIOR TO ADJUSTMENT
FIGURE 4
5. Once the overall height has been confirmed, measure the
distance from the top surface of the pedestal unit to the
floor. See Figure 5. This measurement will be needed for
the installation of the wooden mounting cleats.
A
FIGURE 5
