Sharp SJG2351FS, Operation Manual & Installation Instructions

Page: 15 / 20

15
OPERATING REFRIGERATOR
DISPLAY
A. When plugging in the refrigerator, the display screen will
totally display for 3 seconds, meanwhile the starting up
bell rings, then the display screen enters the normal display
of operation.(When power-on for first time, the default set
temperature of the refrigerator room and the freezer room
is 41˚F/ 0˚F).
B. It will display the set temperature of both refrigerator and
freezer rooms when there is no fault.
C. Under normal circumstances, the display light will go out
after 30 seconds in the lock state, button operation on display
panel would wake up the display screen; if the opening door
action wakes up the display screen, the display light would
go out immediately when the door is closed.
D. When an error occurs, the display will light up with a
corresponding error code and stay on for 30 seconds before
going out.
LOCK/UNLOCK
A. In the unlock state, press and hold the lock/unlock button for
3 seconds to enter the lock state, and the buzzer sound rings.
B. In the lock state, press and hold the lock button for 3 seconds
to enter the unlock state and the buzzer sound rings.
C. It will enter the lock state if there is no opening door action
or any buttons operation within 30 seconds.
D. The alarm sound can be stopped by pressing any one button
in the lock state, but all other button operations need to be
performed in the unlock state. If you operate in the lock state,
an error beep will be given.
REFRIGERATOR TEMPERATURE
SETTING
Click the temperature control button of refrigerator room to
change the set temperature of refrigerator room, Each time
click the button, the set temperature will drop 1˚F. when the
set temperature reaches the 34˚F, click the button again, the set
temperature will switch to 44˚F. The temperature setting will
take effect after the display panel is locked
FREEZER TEMPERATURE SETTING
Click the temperature control button of freezer room to change
the set temperature of freezer room, Each time click the button,
the set temperature will drop 1˚F. When the set temperature
reaches the -7˚F, click the button again, the set temperature will
switch to 7˚F. The temperature setting will take effect after the
display panel is locked.
MODE SETTING
A. Press the CHILL BOOST button to start the rapid cooling
function. The refrigerator room is set at 34˚F automatically,
and the CHILL BOOST icon shines. When exit the CHILL
BOOST mode, the set temperature of refrigerator room will
go back to the set temperature before CHILL BOOST mode.
B. Press the FREEZE BOOST button to start the rapid freezing
function. The freezer room is set at -7˚F automatically, and
the FREEZE BOOST icon shines. When exit the FREEZE
BOOST mode, the set temperature of freezer room will go
back to the set temperature before FREEZE BOOST mode.
C. Press the ICE MAKER button, the ice-making function
could be switched between on/off. When the icon is on,
it indicates that the ice-making function is activated.
ERROR CODE
When the following tips to appear on the display screen,
it indicates a problem with the refrigerator. Although the
refrigerator in the following fault case can still provide cool/
freeze functions, but the user should contact maintenance
personnel, ensure the normal use of refrigerator.
ERROR
CODE
ERROR DESCRIPTION
E1 Temperature sensor failure of refrigerator room
E2 Temperature sensor failure of freezer room
E5 Defrost sensor error of freezer room
E6 Communication error
E7 Ambient temperature sensor error
EH Humidity sensor error
Eo Ice maker error