background image

17

OPERATING REFRIGERATOR

LOCK/UNLOCK

To unlock the display panel keys, press the LOCK/UNLOCK 

key and hold for 3 seconds until an audible chime sounds 

indicating the appliance controls are unlocked. To lock the 

display panel, press the LOCK/UNLOCK key and hold for 3 

seconds.

TEMPERATURE MODE

To change the temperature default mode to Celsius or Fahrenheit, 

press the "+" and "-" keys simultaneously and hold for 3 seconds. 

WATER/ICE MAKER DISPENSER SELECTION

Touch the key to select desired mode; the indicator light will 

illuminate. 
Note: Water dispenses immediately after lever is pressed and ice 

(cubed and crushed) dispenses 3 seconds after lever is pressed.

TEMPERATURE SETTING 

REFRIGERATOR 

Press FRIDGE key to control the refrigerating temperature and 

then press the“-” and “+” temperature control keys to adjust the 

temperature of the refrigerator. When the“-” key is pressed once 

the temperature will drop by 1°C/1°F. After reaching 1°C/34°F, 

the temperature display will go back to 7˚C/44˚F. When the “+” 

key is pressed once the temperature will rise by 1°C/1°F. After 

reaching 7°C/44°F, the temperature display will go down to 

1˚C/34˚F. The temperature setting will take effect after locking.

FLEX DRAWER

Press FLEX DRAWER MODE key to select one of the four 

preset temperature modes. Upon every press, the temperature 

mode switches from MEAT (-1˚C/30˚F) to BEV (1˚C/34˚F) to 

DELI (3˚C/37˚F) to WINE (5˚C/41˚F) and a corresponding 

temperature is indicated at the Temperature Zone display. The 

settings will take effect after locking.

FREEZER DRAWER

Press FREEZER key to select the freezer drawer temperature, 

and then press the“-” and “+” temperature control keys to adjust 

the temperature of the freezer drawer. When the“-” key is pressed 

once the temperature will drop by 1°C/1°F. After reaching 

-22°C/-7°F, the temperature display goes back to -14˚C/7˚F. The 

“+” key is pressed once the temperature will rise by 1°C/1°F. 

After reaching -14°C/7°F, the temperature display goes down to 

-22˚C/-7˚F. The setting will take effect after locking.

ICE MAKER ON/OFF

When the ice maker is turned on, the ICE MAKER ON/OFF 

light will illuminate; when the ice maker turned off, the ICE 

MAKER ON/OFF light will turn off after 3 seconds delay.
Press the ICE MAKER key to turn on the backlight and the ice 

maker; press the ICE MAKER key again to turn off the backlight 

and the ice maker. It will take effect after locking.
Note: When the ICE MAKER is on, the ice maker will release 

ice into the ice making chamber even if the ice storage box is 

removed.

BOOST MODE SETTINGS

CHILL BOOST

Press and hold the FRIDGE TEMP key for 3 seconds to enter 

the CHILL BOOST mode, until the icon of the refrigerator turns 

blue. The CHILL BOOST mode will take effect after being 

locked. When CHILL BOOST mode is activated, the refrigerator 

temperature is automatically set at 1°C/34°F. When the CHILL 

BOOST  mode  is  deactivated,  the  refrigerator  temperature 

automatically returns to the temperature set before the CHILL 

BOOST mode was activated

FREEZE BOOST

Press and hold the FREEZER TEMP key to enter the FREEZE 

BOOST mode, and the icon of the freezer drawer turns blue. The 

FREEZE BOOST mode will take effect after being locked; the 

freezer temperature is automatically set at -22°C/-7°F. When the 

FREEZE BOOST mode is deactivated, the freezer temperature  

automatically returns to the temperature set before the FREEZE 

BOOST mode was activated.

DOOR OPEN ALARM

If any door is opened for more than 2 minutes, an alarm chime 

will sound. Close the door or press any key to turn off the alarm 

chime (whether in locked or unlocked mode).

ECO MODE

Press ENERGY SAVING key to enter the ECO mode, and 

the backlight will illuminate; the FREEZE BOOST mode is 

automatically cancelled. The freezer temperature is adjusted 

to -14°C/7°F and the refrigerator temperature to 7°C/44°F. 

Press the ENERGY SAVING key again to exit the ECO mode, 

the backlight will turn off,  and the temperature of freezer and 

refrigerator will return to the temperature set before entering the 

ECO mode. The mode will take effect after locking.

ICE/WATER DISPENSER

The ice/water dispenser is located on the outside of refrigerator 

door. You may select cubed ice, crushed ice or cold water. The 

dispenser only works when the refrigerator door is closed.

FOR COLD WATER

1.  Press  the  WATER  key  until  the  indicator  light  turns 

on. See Figure 21.

2.  Gently press a glass or cup against the lever until water is 

dispensed. To end, release the lever. See Figure 22.

Figure 21

Figure 22

Summary of Contents for SJG2254FS

























Reviews: