background image

11

Important

To prevent cracks on the inside surfaces and plastic 

components, follow these tips .

• 

Wipe out food oil adhered to plastic parts.

• Some household chemicals may cause damage, so use 

only diluted washing-up liquid (soapy water).

• If undiluted detergent is used or soapy water is not 

wiped off thoroughly, it may result in cracks of plastic 

parts.

• Wipe any spills from the refrigerator immediately as acid 

or alkaline in the food can cause cracking and staining 

of plastic parts.

Cleaning

 

Remove the accessories (e.g. shelves) from the cabinet 

and the door. Wash them with warm soapy dishwashing 

water. After that, rinse them in clean water and dry. 

 

(Only fruit and vegetable shelf is not removable.)

 

Clean the inside with a cloth soaked in warm soapy 

dishwashing water. Then, use cold water to wipe off 

soapy water thoroughly.

 

Wipe the exterior with a soft cloth each time it gets 

dirty.

 

Clean the Magnetic door seal with a toothbrush and 

warm soapy dishwashing water.

 

Wipe the control panel with a dry cloth.

Note

• Do not use hot water, household cleaning powders, 

creams or spray-on cleaning products, or any other 

cleaning products such as mineral turpentine, 

methylated spirits, thinners, petrol etc. These may 

damage your refrigerator and may void any warranty.

• If the power supply is disconnected, please wait at least 

5 minutes before re-connecting power.

• The glass shelves weigh approximately 3 kg each. Hold 

them firmly when removing from the cabinet and carry.

• Do not drop objects inside the refrigerator or strike the 

inner wall. This may cause cracks to the inner surface.

Defrosting

Defrosting is automatically operated by a unique energy 

saving system.

When the compartment light is blown

Contact the service agent approved by SHARP to replace 

the light. The light is not to be replaced other than by 

qualified service personnel.

Before transporting

Wipe up water in the evaporating pan. Before wiping 

up the water, wait more than 1 hour after pulling out the 

power plug because refrigeration cycle equipment is 

extremely hot. 

 

(The evaporating pan is located on the rear of the 

product.)

Switching off your refrigerator

If the refrigerator needs to be switched off for an extended 

period, the following steps should be taken to reduce the 

growth of mould:

1. 

Remove all food.

2. Remove the power plug from the power point.

3. Clean and dry the interior thoroughly.

4. Ensure that all the doors are wedged open slightly for 

air circulation.

Care and cleaning

Evaporating pan

(B658).indb   11

2015/06/16   13:49:45

Summary of Contents for SJ-XP580G

















Reviews: