Installation
4
Installation
Free standing type
Free standing type
1
Keep adequate ventilation space around the refrigerator.
•
•
•
Overall space required in use
100mm
or more
50mm
or more
50mm
or more
1080 mm
1380mm
750 mm
895 mm
2
Use the two front the adjustable feet to place the
refrigerator flatly and firmly on the floor.
Adjustable foot
•
3
(2 pcs.)
Connect the appliance via a correctly installed socket.
Note
•
Position your refrigerator so that the plug is accessible.
•
•
Before using your refrigerator
The figure shows the
minimum required space
for installing the refrigerator.
The amount of space
around the refrigerator
affects the amount of
power consumption.
Insufficient spacing will
decrease cooling efficiency
and increase energy consumption.
This may reduce the life of the unit and void warranty.
If using the refrigerator in the smaller space
dimension than figured, it may cause temperature
rise in the unit, loud noise and failure.
The space between the rear of the refrigerator and
the wall should be 50
mm or more.
Keep your refrigerator out of direct sunlight and do not
place next to heat generating appliance.
Do not place your refrigerator directly on the ground.
Insert suitable stand such as wooden board under the
refrigerator.
Clean the inside parts with a cloth soaked in warm water.
If soapy water is used, wipe it off thoroughly with water.
