background image

9

SJ-V35L
SJ-V39L

1. ADJUSTABLE TEMPERATURE CONTROL

(1) Temperature control of freezer

Thermostat (senses freezer temperature) operates on ON/OFF switchover to control the compressor and
allows the freezer temperature to keep at a suitable temperature.
However adjust the freezer temp. control knob as follows depending upon the storing condition of foods.

Figure F-1.

(2) Temperature control of refrigerator

Damper-thermostat senses temperature of the refrigerator and changes the opening angle of the damper
automatically.
However, as the Damper-thermostat has no function to switch on or off the compressor and cool air
circulating fan, the freezer temperature control causes temperature in the refrigerator to vary to some
extent.
However, adjust the refrigerator temp. control knob as follows depending upon the cooling condition.

Figure F-2.

NOTE:

The refrigerator temperature is affected also by the freezer temperature. If the freezer temp.
control knob is set at the position "MAX", the temperature tends to be lower than the following
values, and if set at near the position "MIN", temperature tends to be higher.
If the refrigerator is operated for a long time with the freezer temperature control sets the "MAX"
position, foods stored in the refrigerator compartment may also freeze.
When refrigerator temperature control sets to the "CHILLED ZONE", some foods stored may
freeze.
In this case adjust control set back to the "MED" position.
When refrigerator temperature control sets to the "CHILLED ZONE", some foods stored in fresh
cases may also become frozen.

The values shown above refer to the measurement carried out center area and 1/3 of overall height from the bottom
at each of the refrigerator and the freezer after machine has been operated at an ambient temperature of 30˚C with no
food stored and the door closed until the temperature is stabilized.
The values vary depending upon frequency of opening and closing the door, ambient temperature, amount of stored
foods and manner of storing foods.

FUNCTIONS

MIN

MED

MAX

FREEZER TEMP. CONTROL

Coldest

KNOB
SETTING

MAX(Coldest)

MIN

PURPOSE

For making ice rapidly or fast 
freezing.

For storing frozen food for a
short period  (up to one month).

When frozen food or ice cream
is not stored.

For normal freezing.

MED

When restocking with fresh 
food.

VALUE OF 

TEMPERATURE

Approx. -21˚C

Approx. -18˚C

Approx. -15˚C

KNOB
SETTING

MED

CHILLED
ZONE
(Coldest)

MIN

PURPOSE

For keeping freshness of
 food longer.

For normal operation.

When the refrigerator provides 
excessive cooling.

When the refrigerator does 
not provide sufficient cooling.

VALUE OF

TEMPERATURE

refrigerator

chilled room

Approx. 

0˚C

Approx. 

-3˚C

Approx. 

6˚C

Approx. 

4˚C

Approx. 3˚C Approx. 1˚C

The values shown above refer to the case where the freezer temp. control
 knob is set at "MED".

Coldest

MIN

MED

CHILLED
   ZONE

REFRIGERATOR TEMP. CONTROL

Summary of Contents for SJ-V35L-GY



















Reviews: