48
Ice tray cleaning
Ice tray and pipe are cleaned automatically
(It is not possible be removed and washed in water)
1
2
When it beeps,
3
4
When the lamp is off, open
the ice compartment slowly.
Remove the Ice case and
take out the towel.
Wash the Ice case with a soft
sponge and water, and reattach
it after wiping off the water.
Towel
Ice case
Fill the water tank with
water and set into the
unit.
• After cleaning, water will be
discharged in the Ice case.
• The water discharge amount at
one cleaning will be different
depending on the size of ice
cubes that are currently set.
Normal : 100mL
Large :
230mL
(At first, it is a normal size.)
• Do not place more than 2
towels.
(It may cause malfunction.)
• Once it completes cleaning, it
returns to the ice making
operation that is currently set.
What to prepare: 1 towel
press
for more than 2 seconds (until it beeps).
Under
operation
Under
operation
Supply water from water tank to ice
tray.
It takes about 40 seconds.
Discharge water from ice tray to ice
case.
It takes about 40 seconds.
[Display of ice tray cleaning]
• Do not open the door of
ice compartment during
operation.
Blinking slowly
during operation
Ice case
Water level
Water level
Note
At the beginning or when the refrigerator
has not been used for a long time.
Empty the ice case and place a towel
or something.
Unless letting a towel absorb water,
water may spill when removing the case.
Press
Select with or key and
press
for more than 2 seconds (until it beeps) again.
Water
level
To start operation
When it beeps, press .
Summary of Contents for SJ-GF60A
Page 55: ......
Page 56: ...Printed in Japan TINSJB478CBRZ 16JK 3 SHARP CORPORATION ...
