SJFS810VWH
43
3)
Cover Ice cube tray at with Ice heater cover t , and fix 2 point by tapping screw.
*Set Ice heater cover t so as to "
" marking side is on axis of Ice cube tray at.
*Tightening toruque is 0.5N
m.
Ice cube tray at
Ice heater cover t
Screw
marking “ ”
axis
4) Put rib of Ice senser in groove of ice maker ass'y.
*Put head of Ice senser points final gear of Ice maker ass'y.
Fix Ice senser to Ice maker ass'y by tapping screw.
*Use jig to prevent variability fixing Ice senser.
*Fix Ice senser but remove allowance between Ice senser and Ice maker ass'y.
*Tightning torque is 0.5N m.
Screw
Ice maker ass’y
Ice maker ass’y
final gear
move this direction
(remove backlash)
groove
rib
head
Ice senser
5)
Put Ice cube maker to final gear of Ice maker ass'y.
Rollup the insulating (vinyl) tape twice and more on the harness.
*Set Ice cube maker correct direction asbelow picture.
*Put certainly Ice cube maker to final gear.
Ice cube maker
Ice maker ass’y
Harness
Insulating
(vinyl) tape
20± 5mm 70±5mm
Insulating (vinyl) tape
[Color : black ,
width : 50mm ,
length : 70mm]
Harness
Ice maker ass'y