SJ-DX26A
SJ-DX26A
22
3
請注意
每月清潔一次，請在嚴重髒污前進行清潔。
保養及清潔
警告
當冷藏室照明燈損壞時
請聯繫SHARP授權的服務代理商要求更換冷藏室照明燈。
非專業服務人員不得更換冷藏室照明燈。
切斷雪櫃的電源時
●
為避免損壞雪櫃，請勿使用強力清潔劑或溶劑（油漆、塗料、拋光粉、汽油、沸水等）。
●
供電中斷時，請等待至少5分鐘之後再重新接通電源。
●
操作面板附近濺到果汁等時，請馬上將其擦掉。否則將導致操作面板的故障。
●
在雪櫃內請勿使物件掉落，或用物件強烈碰撞內壁。否則可能導致內壁破裂。
■ 為了防止觸電，在清潔前請先拔掉雪櫃的電源插頭。
■ 請勿直接將水灑在雪櫃的內部和外部，這樣會導致
生銹及絕緣性能下降。
為防止雪櫃內壁表面和塑膠部件發生開裂，請遵從如下操作提示。
●
食用油沾上塑膠部件時，請將之擦掉。
●
某些家用化學清潔劑可能會腐蝕雪櫃內壁，
因此只能使用稀釋過的廚房用清潔劑（肥皂水）。
●
如果使用未稀釋的清潔劑或者未徹底擦淨肥皂水，
則有可能損壞雪櫃的塑膠部件。
長期出門的時候，如果要切斷雪櫃的電源，請取出雪櫃內
的全部食物，將內部徹底擦洗乾淨。請從插座上拔出電源
插頭，並打開雪櫃門。
除霜
定期除去雪櫃內的霜，存儲於蒸發盤中，利用壓縮機等的
熱量將其蒸發。
拆下雪櫃內的層架和櫃門的門架，瓶架。
用溫水和廚房用
清潔
劑清洗。用水洗清並使
之乾透。
雪櫃內部要用浸泡在廚房用
清潔
劑的溫水裏的
軟布擦洗。
然後，用冷水將肥皂水擦乾淨。
雪櫃的外殼沾上污漬時，請用柔軟的布塊擦洗。
雪櫃門封條要用廚房用
清潔
劑的溫水
和牙刷洗淨。
請用乾布擦拭操作面板。
如果因停電等原因導致電源切斷時
再次通電時，將出現下述情況。
節能模式
温度設定（冷藏室、冷凍室）
快速冷凍
櫃門警號
PCI指示燈
智能鎖定
操作音
PCI模式
保持停電前的
設定内容。
操作停止。
1
2
3
4
5
重要提示
＜冷藏室層架的拆卸方法＞
拆卸時:
稍微托起後拉出。
安裝時:
1.沿著導軌插入，
2.之後稍微托起,然後插入到內側。
(如未稍微托起，將會導致導軌
損壞。)
· Do not use combustible sprayers near
the refrigerator. (Otherwise fire and/or
explosion will result.)
· Do not wet the refrigerator neither
outside nor inside.
· Do not store highly volatile substance and combustible
substance. (e.g. ether, petrol, propane gas, adhensive
agents and pure alcohol)
(Otherwise fire and/or explosion will result.)
· Do not store test sample and/or reagent in the refrigerator.
(Otherwise deterioration may result.)
Household refrigerators cannot preserve goods which
demand refined temperature control.
Caution
In Use
· Please do open all windows to get good ventilation
in case of gas leak. (There is a risk of fire and/or
explosion if the gas comes into the socket.)
· Please do unplug the refrigerator if any abnormality
(e.g. a burning smell) is noticed (so that electric shock
and/or fire can be avoided).
If any maintainance is needed, please contact the
SHARP Service Center.
Installation
· Please locate the refrigerator at a level and firm place.
(If the refrigerator is located at an unstable place, it will
fall down when the door is opened.)
· Please leave some space around the refrigerator in
order to ensure ventilation. (Leakage and retention of
the refrigerant will lead to fire and/or explosion.)
· Do not locate the refrigerator at wet
places or locations exposed to
splashing water.(Otherwise the
deterioration of the electrical
insulation will lead to electricity
leakage.)
Power, Power Plug and Power Cord
· When locating or moving the refrigerator, please unplug
it and do not bundle up the power cord. (Otherwise
electricity leakage and/or fire will result.)
· Do not squeeze the power plug with the refrigerator.
(Otherwise damage and/or overheat of the plug will
cause fire.)
· Do not use damaged power plug or loosened socket.
(Otherwise electric shock and/or leakage will result.)
· Do not touch the power plug with wet hands. (Otherwise
electric shock and/or leakage will result.)
· Please use an AC 220V power socket individually and
insert the power plug thoroughly (so that electric shock
and/or fire can be avoided).
· Please wipe the dust off the plug with a dry cloth
regularly (so that electric shock, electricity leakage
and/or fire can be avoided).
· Please remove the power plug when cleaning the
refrigerator or replacing the inner light of the refrigerator
(so that electric shock, electricity leakage and/or fire can
be avoided).
Warning
To prevent fire, leakage, electric shock and / or injury.
■
The symbols classified as follows indicate the
results of neglect or mishandling.
Failure to follow this instruction may
result in injury or damage to property.
Caution
Failure to follow this instruction
may result in death or serious injury.
Warning
■
The symbols classified as follows indicate the
contents that should be followed.
Actions that should be strictly prohibited.
Actions that must be taken.
refer to Page 5
refer to Page 5
Please read and follow below instructions carefully in order to avoid injury and/or damage to you and others.
· Do not damage the cooling loop (and the pipes).
(The leakage of refrigerant may cause fire and/or explosion.)
If the cooling loop (and the pipes) get damaged, please
avoid fire and gas, open all windows and ventilate the
room. Then contact SHARP Service Center.
· Do not operate any electric appliance inside the refrigerator.
(If the refrigerant is leaked, it may cause fire or explosion
because of the spark from the joint of such electric appliance.)
· Do not use metal which can cause damage to pipes
when defrosting or deicing.
(If the refrigerant is leaked, it may cause fire or explosion.)
<The refrigerator is equipped with auto-defrosting system.>
