18
SJ-D21P
SJ-D23P
7. Set Propeller fan 90 and Fan clamp to " 6 " ass'y as shown in Fig. A-15.
aluminum tape
aluminum tape
Datum : R end
View from D
Thermo. fuse holder
Fuse ass'y
aluminum tape
Sec. AA
wire
wire
wire
tube
Sec. BB
Sec. CC
(size 40 x 130)
A
A
B
D
Fuse ass'y
Thermo. fuse holder
after assembled
C
C
B
THERMAL FUSE D ASSEMBLY
1. Set Fuse ass'y to Thermo. fuse holder.
2. Wind the aluminum tape to the Thermo. fuse holder.
Fig. A-16
Fig. A-15
NOTE
(1) Slit of each Fan clamp and Propeller fan 90 should not be at same position.
(2) Fan clamp should be inserted virtically to the end of boss.
(3) Propeller fan 90 should not be taken out from shaft when pulled by 2kgf.
Propeller fan 90
fan boss
NO GOOD
GOOD
Fan clamp
" 6 " ass’y
7.5 0.5
Propeller fan 90
Fan clamp
Fan clamp
shaft
slit
slit
+