EN -13-
CHAPTER -5: CLEANING AND MAINTENANCE
Replacing LED Lighting
If your appliance has LED lighting contact the help desk as this should be changed by authorized personnel only.
CHAPTER -6: SHIPMENT AND REPOSITIONING
Transportation and Changing Positioning
• The original packaging and foam may be kept for re-transportation (optional).
• Fasten your appliance with thick packaging, bands or strong cords and follow the instructions for transportation
on the packaging.
• Remove all movable parts (shelves, accessories, vegetable bins, and so on) or fix them into the appliance
against shocks using bands when re-positioning or transporting.
Always carry your appliance in the upright position.
Repositioning the Door
• It is not possible to change the opening direction of your appliance door if door handles are installed on the front
surface of the appliance door.
• It is possible to change the opening direction of the door on models without handles.
• If the door-opening direction of your appliance can be changed, contact the nearest Authorised Service Centre
to change the opening direction.
CHAPTER -7: BEFORE CALLING AFTER-SALES SERVICE
If your fridge freezer is not operating as expected, there may be a simple solution.
If your refrigerator is not working.
Check that ;
• Is there a power failure?
• Is the plug connected to the socket correctly?
• Is the fuse of the socket to which the plug is connected or the main fuse blown?
• Is there any failure at the socket? To check this, plug your refrigerator into a known working socket.
If the different compartments of the fridge do not get cold enough:Check that ;
• You have not overloaded the appliance ,
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough space at the rear and side walls.
Your fridge freezer is too noisy.
The cooling gas which circulates in the refrigerator circuit may make a slight noise(bubbling sound) even when the
compressor is not running. Do not worry this is quite normal. If these sounds are different check that ;
The appliance is well levelled ,
• Nothing is touching the rear.
If there is water in the lower part of the refrigerator ;
Check that ;
The drain hole for defrost water is not clogged insert a space please (Use defrost drain plug to clean the drain hole)
Recommendations
• In instances of a power cut unplug the appliance. This prevents damage to the compressor. You should delay
plugging in 5 – 10 minutes after you regain power supply. This will avoid damage to components.
• The cooling unit of your refrigerator is hidden in the rear wall. Therefore, water droplets or ice may occur on the
rear surface of your fridge due to the operation of the compressor in specified intervals. This is normal. There
is no need to perform a defrosting operation unless the ice is excessive.
• If you will not use your fridge for a long time (e.g. in summer holidays) unplug it. Clean your fridge according to
Part 4 and leave the door open to prevent humidity and smell.
