6. User simulation
User simulation allows the user to change or cancel the factory set-
tings easily according to his or her desirable operating environment
on the following functions.
(1) Functions which can be reset or canceled by
User simulation.
Auto clear function:
Time for returnign to the standard state can
be changed or canceled. (Standard state:
copy quantity "0," 100% AE mode)
Pre-heating function
(Power saving):
Time to enter the pre-heat mode and the auto
power shut-off mode can be changed or can-
celed. (Refer to [1]-4 New functions, page 1-
1.)
Stream feeding mode: When set to this mode, the document feed
lamp blinks for about 5 sec after copying with
the SPF. If a document is set again, copying
is started automatically.
(2) User simulation prcedure
Simulation procedure
State
Paper jam/
photoconductor/
toner supply
warning LED
Copy quantity
display
Print LED
1. Press the paper feed section select
key for more than 5 sec.
User simulation input allowed.
Blink
OFF
2. Enter a code number with 10 key.
Simulation code selection.
Blink
ON
3. Press the COPY button.
Simulation code determined.
Blink
ON
4. Enter the selection code with 10 key.
Simulation code menu selection.
Blink
ON
5. Press the COPY button.
Simulation code menu determined.
Blink
OFF
6. Press the paper feed section select
key.
Escape from user simulation.
OFF
Returns to
copy quantity
display.
—
*
Press the clear key.
•
When this key is pressed during user
simulation selection, the mode returns to
state 1 (user simulation input allowed.)
(Use this key to correct mistyping of input.)
Blink
OFF
•
After completion of program setting, when
this key is pressed, the mode the following
program input can be made.
(
:
Blink)
(3) User simulation code table
1
1
1
2
1
2
1
Program
Sim code
Selection code:
setting content
Factory
setting
Auto clear time
setting
1
0
: OFF
1
: 30 sec.
2
: 60 sec.
3
: 90 sec.
4
: 120 sec.
F
Pre-heat mode
setting and time
setting
2
0
: OFF
1
: 30 sec.
2
: 60 sec.
3
: 90 sec.
4
: 120 sec.
F
Program
Sim code
Selection code:
setting content
Factory
setting
Auto shut-off mode
setting and time
setting
3
0
: OFF
1
: 2 min.
2
: 3 min.
3
: 5 min.
4
: 10 min.
5
: 15 min.
F
Stream feeding
mode setting and
time setting
(
*
Machines with
SPF installed only.)
4
0
: ON
1
: OFF
F
8 – 13
Summary of Contents for SF-2214
Page 5: ...1 2 ...
Page 39: ...5 15 ...