23
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
CODES
MEANING
POSSIBLE CAUSES
E0
Communication exception
The display can't receive signal or the main board can't send signal
Contact customer service
E1
Longer inlet time
Faucet is not opened
Water intake is restricted
Water pressure is too low
Improper or Incomplete Draining
Drain Hose is extended more than 10 ft from the dishwasher
Drain Hose is not properly looped underneath sink or not installed with
air gap
Drain Hose is kinked, compressed or otherwise damaged
Wrong Drain Hose used (use only supplied Sharp Dishwasher Drain
Hose)
E4
Overflow
Some element of dishwasher leaks
E8
Failure of orientation of distributary valve
Open circuit or break of distributary valve
E9
Holding a button for longer than 30 seconds Water or some other material on the button
WARNING
• If overflow occurs, turn off the main water supply before calling for service.
• If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.
