SD-SG11
E-24
15-24.fm
01/7/12
E
F
Radio
Lis
te
n
in
g
to
the
R
a
dio
Preset tuning
(Remote control operation)
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton.
Note:
The backup function protects the memorized stations for a few hours should there be
a power failure or the AC power cord disconnection.
To recall a memorized station
(Remote control operation)
Press the TUNER PRESET or button to select the desired station.
The direct buttons allow you to recall a memorized station.
To select a preset station between the 11 and 40:
For example, to choose 28
To erase all the contents of the preset
memory
(Remote control operation)
1
Perform steps 1 - 4 in the "Tuning" section on page 23.
2
Press the ENTER button to enter the preset tuning saving mode.
3
Within 5 seconds, press the TUNER PRESET or button to se-
lect the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the ENTER button to store that station in
memory.
If the preset number indicator goes out before the station is memorized, repeat
the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorized will be
erased.
1 Press the " 10" button.
2 Press the "2" button.
3 Press the "8" button.
1 Press the TUNER (BAND) button.
2 Hold the CLEAR button down for 3 seconds
or more.
3 Press the ENTER button.
Downloaded from:
