Sharp R-956INW, Operation Manual

Page: 74 / 90

GB-15
Plug in the oven. The oven display will show: “0:00”, an the audible signal will sound once.
This model has a clock function and the oven uses less than 1.0W in stand by mode.
To set the clock, see below.
When the microwave oven is plugged in to the AC socket, LED will display " 0:00 ", the buzzer
will ring once, and the microwave will turn on in standby mode.
1. Press CLOCK/PRESET button, and the screen will show 24H. Within 3 seconds, press the
button once again to choose the clock system: 12H or 24H. The default setting is 24 hours
2. Use the numeric buttons to enter the correct time. For example, if you want set the clock
on 10:12, press "1, 0, 1, 2".
3. Press CLOCK/PRESET button to finish clock setting. " : " will start flashing.
Notes:
1 ) You can cancel the clock setting procedure with STOP/CLEAR key.
2 ) Opening the oven door does not affect the clock operation.
This oven features a delayed start function. You can set it to start the cooking process with
the delay of up to 99 minutes and 99 seconds.
1.
Press
CLOCK/PRESET
to enter the delayed start setting mode.
2.
Use the numeric keys and enter the desired delay time . (The maximum setting is 99 min-
utes and 99 seconds)
3. Press START/+30SEC key to confirm setting.
4. When the oven starts the process, the buzzer will ring 2 times.
Notes:
1) Automatic Menu can only be as a single-paragraph booking, unfreezing can not be sched-
uled;
2) To use this function, you must set up the clock first.
3) Use
STOP/CLEAR
key to cancel the delay timer setting.
4) If the start time is reached, and the oven door is open, the cooking is put on hold. After
closing the oven door, press the
START/+30SEC
button to start the operation.
BEFORE OPERATION
SETTING UP THE CLOCK
DELAYED START FUNCTION