Sharp R-954AST, Operation Manual

Page: 12 / 26

MY-11
BEFORE OPERATION
SETTING THE CLOCK
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock,
see below.
Your oven has a 24 hour clock feature.
1. Press the CLOCK/KITCHEN TIMER button once. The hour fi gure will fl ash and the clock indicator will
illuminate.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23.
3. Press the CLOCK/KITCHEN TIMER button, the minute fi gure will fl ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time
should be within 0-59.
5. Press the CLOCK/KITCHEN TIMER button to start the clock. The icon “:” of the digital time will be
fl ashing on the display and the clock indicator will disappear.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock
has not been set, the display will show "0:00".
• To check the time of day during a cooking process, press CLOCK/KITCHEN TIMER button and the
LED will display the time of day for 2-3 seconds. This does not aff ect the cooking process.
• If in the process of setting the clock, the STOP/CLEAR button is pressed, the oven will revert back to
the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently
show "0:00" after the power is reinstated. If this occurs during cooking, the programme will be
erased. As will the time of day.
KITCHEN TIMER FUNCTION
You can use the kitchen timer function, for timing in instances where microwave cooking
is not involved for example to time boiled eggs cooked on conventional hob or to monitor
the standing time for cooked/defrosted food.
Example:
To set the timer for 5 minutes.
1. Press CLOCK/
KITCHEN TIMER
once.
2. Rotate ENTRY
dial to select
time.
3. Press the START/
+30sec./ENTER
key to start the
timer.
4. Check the display.
(The display
will count down
through the
programmed time.)
When the timer arrives at 0:00, an audible signal will sound 5 times and the LED will then
display the time of day.
You can enter any time up to 95 minutes. To cancel the
KITCHEN TIMER whilst counting
down, simply press the STOP/CLEAR button.
NOTE: The KITCHEN TIMER function cannot be used whilst cooking.