23
A40509,R-8000G O/M
3. Setting SelectaProgram (except for Express
Defrost) and Microwave Cooking
P R O C E D U R E
2
Touch number
pad to select
desired memory bank.
1
Touch
SET
pad.
* Suppose you want to set a program for 2 minutes
at 70% microwave power level in memory 11.
3
Enter desired program.
Touch
SELECTA TIME
pad.
4
Touch
SET
pad twice to
save the program.
x 2
M E M O R Y O P E R A T I O N
Your oven is preset with a multiplier factor of 1.6 for
double quantity and 2.0 for triple quantity.
You can change the multiplier for double or triple
quantity and store it in memory.
Setting Multiplier Factor for SelectaProgram
(except for Express Defrost) and Microwave
Cooking
P R O C E D U R E
2
Touch
DOUBLE/TRIPLE
QTY
pad.
1
Touch
SET
pad.
4
Touch
SET
pad.
3
Enter desired multiplier
factor.
6
7
Touch
SET
pad twice to
save the new multiplier.
x 2
* Suppose you want to set the multiplier to 1.67 for
double quantity in memory 11.
Touch number
pad to select
desired memory bank.
Touch the number pad 2 to
change the multiplier factor
for double quantity.
5
NOTE:
1. To change the multiplier for triple quantity,
touch the number pad 3 at step 5.
2. The multiplier for Automatic Cooking and
Express Defrost cannot be changed.
If you select any memory bank that has stored
memory for any automatic cooking or Express
Defrost program, an error message will appear in
the display.
Touch
SELECTA POWER
pad 3 times or hold down
until the desired power level
appears.
Enter cooking time.
x 3
NOTE:
1. For SelectaProgram modes,press the SELECTA
PROGRAM pad desired times and SET pad
instead of the SELECTA TIME pad at step 3.
2. More than two Speed Roast sequences cannot be
set in one program at a time.
Cooking mode Maximum cooking time
100 - 60 %
20 min.
50 - 0 %
40 min.
Normal Convection
99 min. 99 sec.
High Speed Grill
High Speed Grill with Micro
Speed Grill
Speed Grill with Micro
Speed Bake
Speed Roast
Microwave
30 min.
99 min. 99 sec.
Each cooking mode has a maximum cooking time.
If the setting time exceeds the maximum time, the
display will show an error message. Touch STOP/
CLEAR pad and program again. Read the following
table carefully before setting the program.
R-8000G P.11-
03.9.24, 5:50 PM
23
