Sharp R-754AST, Operation Manual

Page: 12 / 24

MY-11
BEFORE OPERATION
SETTING THE CLOCK
Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.
This model has a clock function and the oven uses less than 1.0W in stand by mode.
To set the clock, see below.
Your oven has a 24 hour clock feature.
1. Press the KITCHEN TIMER/CLOCK button twice. The hour fi gure will fl ash and the clock
indicator will illuminate.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be with-
in 0-23.
3. Press the KITCHEN TIMER/CLOCK button, the minute fi gure will fl ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input
time should be within 0-59.
5. Press the KITCHEN TIMER/CLOCK button to start the clock. The icon “:” of the digital
time will fl ash on the display and the clock indicator will disappear.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of
day. If the clock has not been set, the display will show "0:00".
• To check the time of day during a cooking process, press KITCHEN TIMER/CLOCK but-
ton and the LED will display the time of day for 2-3 seconds. This does not affect the
cooking process.
• In the process of clock setting, if the STOP/CLEAR button is pressed, the oven will go back
to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will inter-
mittently show "0:00" after the power is reinstated. If this occurs during cooking, the pro-
gramme will be erased. The time of day will also be erased.
KITCHEN TIMER FUNCTION
You can use the kitchen timer function, in instances where microwave cooking is not in-
volved for example to time boiled eggs cooked on conventional hob or to monitor the
standing time for cooked/defrosted food.
Example:
To set the timer for 5 minutes.
1. Press KITCHEN
TIMER/CLOCK
button once.
2. Rotate ENTRY
dial to select
time .
3. Press the
START/+30sec/
ENTER
key to
start the timer.
4. Check the display.
(The display
will count down
through the
programmed time.)
When the timer arrives at 0:00, an audible signal will sound 5 times and the LED will then
display the time of day.
You can enter any time up to 95 minutes. To cancel the
KITCHEN TIMER whilst counting
down, simply press the STOP/CLEAR button.
NOTE: The KITCHEN TIMER function cannot be used whilst cooking.