15
A40XXX, SEARTEC R340/341H
AC Line Voltage
AC Power Required
Output Power
Microwave Frequency
Outside Dimensions
Cavity Dimensions
Oven Capacity
Cooking Uniformity
Weight
Single phase 220V, 50Hz
1.65kW
1200 W* (IEC test procedure)
2450 MHz** (Class B/Group 2)
520mm(W) x 310mm(H) x 447mm(D)
375mm(W) x 226mm(H) x 387mm(D)***
33 Litre***
Turntable (ø320mm tray) system
Approx. 16 kg
SPECIFICATIONS
*
This measurement is based on the International Electrotechnical Commission's standerdised method for
measuring output power.
**
This is the classification of ISM (Industrial, Scientific and Medical) equipment described in the International
Standard CISPR11.
***
Internal capacity is calculated by measuring maximum width, depth and height. Actual capacity for
holding food is less.
CARE AND CLEANING
Disconnect the power supply cord before cleaning or leave the door open to inactivate the oven.
CLEAN THE OVEN AT REGULAR INTERVALS
- Keep the oven clean, or it could lead to deterioration of the
surface. This could adversely affect the life of the appliance and possibly result in a hazardous situation.
Exterior:
The outside may be cleaned with mild soap and warm water, wipe clean with a damp cloth. Avoid the use of
harsh abrasive cleaners.
Door:
Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp cloth to
remove any spills or spatters. Do not use abrasive cleaners.
Touch Control Panel:
Wipe the panel with a cloth dampened slightly with water only.
Do not scrub or use any sort of chemical cleaners. Avoid the use of excess water.
Interior walls:
To clean the interior surfaces, wipe with a soft cloth and warm water for hygienic reasons. After use wipe
the waveguide cover in the oven with a soft damp cloth to remove any food splashes. Built-up splashes
may overheat and begin to smoke or catch fire. Do not remove the waveguide cover. DO NOT USE A
COMMERCIAL OVEN CLEANER, ABRASIVE OR HARSH CLEANERS AND SCOURING PADS ON
ANY PART OF YOUR MICROWAVE OVEN. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY
PART OF YOUR OVEN.
Avoid using excess water. After cleaning the oven, ensure any water is removed with a soft cloth.
Turntable/Roller Stay:
Wash with mild soapy water and dry thoroughly.
SERVICE CALL CHECK
Please check the following before calling for service:
1. Does the display light up?
YES _______ NO _______
2. When the door is opened, does the oven lamp come on?
YES _______ NO _______
3. Place one cup of water (approx. 250 ml) in a glass measure in the oven and close the door securely. Oven
lamp should go off if door is closed properly. Press the INSTANT COOK/START pad once.
A. Does the oven lamp come on?
YES _______ NO _______
B. Does the cooling fan work?
YES _______ NO _______
(Put your hand over the rear ventilation openings.)
C. Does the turntable rotate?
YES _______ NO _______
(The turntable can rotate clockwise or counterclockwise. This is quite normal.)
D. After one minute, did an audible signal sound and COOK
indicator go off?
YES _______ NO _______
E. Is the water inside the oven hot?
YES _______ NO _______
If “NO” is the answer to any of the above questions, please check your wall socket and the fuse in your meter box.
If both the wall socket and the fuse are functioning properly, CONTACT YOUR NEAREST SERVICE CENTRE
APPROVED BY SHARP.
NOTE: 1. If time in the display is counting down rapidly, check Demonstration Mode. (See page14 for details.)
2. If you cook the food over 40 minutes on 100%, the microwave power will be automatically reduced
to avoid overcooking.
SEARTEC R340/341H O/M,P10-15
03.10.30, 11:28 AM
15
