7
BEFORE OPERATION
SETTING THE CLOCK
Website:
http://www.sharp.co.uk/support
Help Line:
08705 274277 (office hours)
Plug in the oven.
1. The oven display will flash:
2. Press the
STOP/CLEAR
key.
3. The display will show:
To set the clock, see below.
1.
2.
3.
x1
NOTES:
• If you press any of the time keys too many times, continue to press until the desired time appears.
• Press the
STOP/CLEAR
key if you make a mistake during programming.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show
after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will
also be erased.
• When you want to reset the time of day, follow the above example again.
1. To set the 12 hour-clock, hold the
POWER/WEIGHT
key down for
3 seconds.
will appear in the display.
2. To set the 24 hour-clock, press the
POWER/WEIGHT
key once
more after Step 1,
will appear in the display.
x1 and hold
for 3 secs.
x2
x3
Select the 24
hour clock.
1. Select the clock
function.
2. To set the hours press the
10 MIN
key twice, and
then the
1 MIN
key 3 times.
Check the display.
Example:
To set the 24 hour clock to 23:35
x1
x5
x1
x3
4. To set the minutes press the
10 MIN
key 3 times, then
the
1 MIN
key 5 times.
3. To change from hours to
minutes press the
POWER/
WEIGHT
key once.
5. To start the clock press
the
POWER/WEIGHT
key once.
x1
x1
and hold for
3 seconds
There are two setting modes: 12 hour clock and 24 hour clock.
R-244M O/MAN & C/BK 1/30/01 4:14 PM Page 7
