R-216(G)
R-216(IN)
R-216(W)
R - 2 1 6 ( Y )
1
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained
service engineers.
Removal of the outer wrap gives access to potential above 250V.
All the parts marked "
∆
" on the parts list may cause undue
microwave exposure, by themselves, or when they are dam-
aged, loosened or removed.
SHARP CORPORATION
OSAKA, JAPAN
SERVICE MANUAL
MICROWAVE OVEN
R-216(G)/ R-216(IN)/ R-216(W)/ R-216(Y)
GENERAL IMPORTANT INFORMATION
This Manual has been prepared to provide Sharp Corp. Service
engineers with Operation and Service Information.
It is recommended that service engineers carefully study the entire
text of this manual, so they will be qualified to render satisfactory
customer service.
WARNING
Note:
The parts marked "*" are used at voltage more
than 250V. (Parts List)
Anm:
Delar märket med "*" har en spänning
överstigande 250V.
Huom:
Huolto-ohjeeseen merkitty "tähdella" osat
joissa jännite on yli 250 V.
Bemerk:
Deler som er merket "asterisk" er utsatt for
spenninger over 250V til jord.
Bemærk:
"Dele mærket med stjerne benyttes med
højere spænding end 250 volt.
SERVICING
PRODUCT SPECIFICATIONS
GENERAL INFORMATION
APPEARANCE VIEW
OPERATING SEQUENCE
FUNCTION OF IMPORTANT
COMPONENTS
TROUBLESHOOTING GUIDE
AND TEST PROCEDURE
TOUCH CONTROL PANEL
COMPONENT REPLACEMENT
AND ADJUSTMENT PROCEDURE
MICROWAVE MEASUREMENT
TEST DATA AT A GLANCE
WIRING DIAGRAM
PARTS LIST
