10. PRACTICAL INFORMATION
1.
When the machine isn’t in operation:
• Disconnect the plug and close the tap.
• Leave the door slightly open to prevent odour formation.
2.
Select the dry option to remove water droplets.
3.
Place dishes in the machine properly to achieve the best energy consumption, washing
and drying performance. Please see the programme and consumption table for more
information.
4.
Rinse dirty dishes before placing them in the dishwasher.
5.
Only use the Prewash programme when necessary.
6.
Do not place the machine near a refrigerator because it will reach high temperatures.
7.
If the machine is located in an area that is at risk of freezing, close the tap, disconnect
the inlet hose from the tap and drain the water inside the hose and the machine
completely.
EN - 2
7
The installation and repairing procedures should always carried out by the Authorised
Service Agent in order to avoid possible risks. The manufacturer shall not be held liable
for damages that may arise from procedures carried out by unauthorised persons.
Repairs may be carried out by technicians only. If a component has to be replaced,
ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage and
put the user at considerable risk.
Contact information for your customer service can be found on the back of this document.
Function-relevant genuine spare parts according to the corresponding Ecodesign order
can be obtained from Customer Service for a period of at least 10 years from the date on
which your appliance was placed on the market within the European Economic Area.
