EN - 21
13. Extra Rinse Option Indicator
If the Rinse option is selected,
washing-rinsing steps will be added into the
selected program, so you can ensure that
your dishes will be extra clean and shiny.
14. Extra Dry Option Indicator
If you select Extra Dry option, extra heating
and drying steps will be added into the se
-
lected program,so your dishes will be dried
more thoroughly.
NOTE:
If an extra option has been
used on the most recent wash program, this
option will remain active on the newly se
-
lected program until the machine turns off.
To cancel this option on the newly selected
wash program, press the Option button (6)
until the light on the button switches off.
15. Wi-Fi Indicator
If the Delay (3) and Select (7) buttons
pressed simultaneously for 3 seconds, Wi-
Fi indicator will start to blink to show that
the machine is ready to Wi-Fi connection.
When the Wi-Fi configuration is done, Wi-Fi
indicator will light up continuously.
16. Remote Control Indicator
After the Wi-Fi configuration is done, re
-
mote control can be activated by pressing
Program button (2) for 2 seconds. Remote
Control indicator will light up continuously
while the remote control is active.
NOTE:
For the remote control setup,
see the Remote Control Function section.
NOTE:
Child lock is activated/deacti
-
vated by pressing the select button
(7)
for
about 3 seconds. When it is activated, all
leds blink and “CL” is shown on the Remai
-
ning time indicator (4).
NOTE:
To save any program as favou
-
rite program, press and hold Programs (2)
and Select (7) buttons simultaneously for 1
second. To select favourite program, press
Program (2) and Delay (3) buttons together
momentarily
NOTE:
If you switch the machine to off
position after selecting the delay time and
the program has started, the delayed time is
cancelled.
Press the Start/
Pause button.
After the program stops, select
your desired program via the
program selection button.
Start the newly selected program by
pressing the Start/Pause button.
The new program will resume
the course of the old program.
7.2. Cancelling a program
If you would like to cancel a program when
it is running.
Press the Start/Pause
button for 3 seconds.
During cancellation, the
End light blinks.
The machine discharges the water
inside it in about 30 seconds.
When the End light turns on,
switch your machine off by
pressing the On/Off button.
