EN -
2
1
8. CLEANING AND
MAINTENANCE
Cleaning your dishwasher is important to
maintain the machine’s service life
.
Make
sure that the water softening setting is
set
correctly and
the
correct amount of
detergent is used to prevent limescale
accumulation. Refill the salt compartment
when the salt sensor light comes on.
Oil and limescale may build up in your
Dishwasher over time. If this occurs:
• Fill the detergent compartment
but do not load any dishes. Select
a program which runs at
a
high
temperature and run the Dishwasher
empty. If this does not clean your
Dishwasher sufficiently, use a
cleaning
agent designed for use with
dishwashers.
• To extend the life of your dishwasher,
clean the appliance regularly each
month
• Wipe the door seals regularly with a
damp cloth to remove any accumulated
residue or foreign objects.
8.1. Filters
Clean the filters and spray arms at least
once a week. If any food waste remains
or foreign objects on the coarse and
fine filters, remove them and clean them
thoroughly with water.
a)
Micro Filter
b)
Coarse Filter
c)
Metal Filter
To remove and clean the filter combination,
turn it counter clockwise and remove it by
lifting it upwards
(1)
.Pull the coarse filter out
of the micro filter
(2)
.Then pull and remove
the metal filter
(3)
.Rinse the filter with lots of
water until it is free of residue. Reassemble
the filters. Replace the filter insert, and
rotate it clockwise
(4)
.
• Never use your dishwasher without a
filter.
• Incorrect fitting of the filter will reduce
the washing effectiveness.
• Clean filters are necessary for proper
running of the machine.
8.2. Spray arms
Make sure that the spray holes are not
clogged and that no food waste or foreign
object is stuck to the spray arms. If there is
any clogging,remove the spray arms and
clean them under water. To remove the
upper spray arm undo the nut holding it in
position by turning it clockwise and pulling
it downwards. Make sure that the nut is
properly tightened when refitting the upper
spray arm.
3
4
1
2
a
c
b
